PoE+ switch
MX-SWITCH1
PoE+ switch
Technical Detail
Overall
Product Designation
MxSwitch
Mx Ordercode
MX-SWITCH1
Technical Data
Ambient Temperature (°C)
0 ... +40 °C
IP Class
Meets IP20
Certifications
EN55032:2012
EN55022:2010; EN55024:2010
EN61000-6-1:2007; EN 61000-6-2:2005
EN61000-6-3:2007+A1:2011
EN61000-6-4:2007+A1:2011
AS/ NZS CISPR22:2009+A1:2010
CFR47 FCC part15B
Compatibility
up to four MOBOTIX door stations, cameras or other PoE+ devices
Power Supply
48 V DC, min. 2 A (via external power supply device)
Status LED
6x (5x RJ45 Ports, 1x theft-protection)
RJ45 Ethernet Connectors
4 PoE+ network ports (IEEE 802.3at, max. 25,5 W on each port); max. combined total load of 75 W on all 4 PoE+ ports may not be exceeded
1 uplink to connect a switch/router/computer
Further Connectors (Terminals)
2 terminals for external power supply 48 V DC
Terminals 1 to 4 (Port A) and 13 to 16 (Port D) loop through wire pairs 4/5 and 7/8 of network cables
8 terminals for backbone pins (future extension connector, reverse)
2 terminals for power supply 12 V DC, 1 A
2 terminals with 12 V DC, controlled by push-button switch
Height Product
61
Width Product (mm)
108
Depth Product (mm)
90
Weight Product (g)
200
Special Instructions
Instructions
- Integrated power supply for door opener with 12 V DC, 1 A (e.g., switched by BellRFID or KeypadRFID)
- Unused wire pairs 4/5 and 7/8 of network installation cables for PoE ports A and D passed through to terminals (“MxSplit“)
- Push-button switch activates 12 V DC for 90 sec. on terminals
- 17/18 (to temporarily disable theft protection of the frames of
- door stations and MxDisplay units)
- Extensibility for future top-hat rail modules (“Backbone”) already integrated